Spiral chute separator is the ideal equipment for mining or selection mine, especially in seashore, riverside, sand beach or creek. This spiral separator machine has the features reasonable structure, simple installation, small occupation, easy operation, stable and clear selection, large capacity, high efficiency, high enrichment selection ratio and recovery, stable running, etc. This ore dressing machine is applicable for selecting materials with size 0.3--0.02mm, such as iron ore, ilmenite, chromite, pyrite, azorite, rutile, monazite, phosphorite, oxide ore, tin ore, tantalum ore, niobium ore and other nonferrous metals with distinct specific gravity difference, and rare matels and nonmetal minerals.

Spiral chute separator installation requirements are as follows:

1. with bolts to connect piece of five spirals into a set of spiral groove, horizontal, the adjacent two pieces of flange connection place within the surface is smooth transition, join to pay special attention to the lower surface shall not be less than the lower surface of the corresponding, radial direction.(groove width direction) from the outer edge alignment, not allowed at the lower edge, the purpose of this installation is to prevent the accident flow splash. Have a seam connection place, need to use putty screeding.

2. Spiral separator base generally don't need to be fixed, but on the same level of four (three) based on plane, after installation, should check the vertical axis of spiral groove is vertical, can adjust the vertical degree under the pillar and gasket. Spiral chute is set at the proper height operation platform, spiral groove pillar with the platform to be appropriate.

3. four pillar of (3 pillar) respectively in four or three, two spiral groove, the spiral groove with bolt and pillar fixed, and then install the cross (a tripod), make each head screw uniformly distributed along the garden weeks, finally on the spin good all bolts. Screw to keep the natural shape, can not have obvious variants.

4. the feeder separator and uniform product concentration do not join with slot bracket, free place on the scaffold, when installation should pay attention to put positive position according to drawing. Each row tube of distributor should be respectively on the corresponding to the trough.

Welcome to visit Fote Machinery: info@sinoftm.com.

spiral concentrator: http://www.fte-china.com/pro/classifiers.html