From the joints leading to the power meter and the wires leading to the motor cross section should meet the carrying capacity, and the wire should be as short as possible to reduce the lead resistance, reducing losses.The development of dry powder ball press machine will help promote the coal briquetting machine enterprise's process.

Drying chassis body is surrounded by insulation sandwich, sandwich using rock wool insulation materials. The density of 80Kg /m³, 100mm rock wool insulation layer thickness.In the dryer bottom, buried scraper conveyor is connected. During coal briquette machine operation, drop to the end material is sent by the en masse conveyor. This can save manpower and energy, reduce equipment downtime. reasonable installation the parallel low voltage capacitor to carried out the reactive power compensation, thus effectively enhancing the the power factor, to reduce the reactive loss, and saves the electrical energy.mesh belt chain adopt 24A, wear rod diameter is 12mm, wear rod spacing is 381mm.

Mesh carbon adopt steel wire, diameter 3mm, pitch 30mm, wear a wire diameter 3mm, belt width 2m.dryer adopts smoke provided by combustion furnace cited by 2 sets of induced draft fans, through both sides of the dryer separate duct enter into the bottom of the dryer.Improve dry powder coal briquetting plant's motor efficiency. If the motor's cooling fan is changed into cooling fan, in load is small and motor is outdoor in the winter, stop using the cooling fan,conducive to reducing energy consumption.

The dryer uses a combination of modular, by the nose, tail and middle section. The middle section is 2 meters long, 2.75 meters wide, the total height is about 3.63 meters. The overall length of the dryer is 30 meters. Belt speed is 0-1.5 meters per minute and the speed is adjustable, single output is 15 tons/h.

briquette press machine: http://www.coal-briquettemachine.com/